TechHub: Bell Revolutionizing Transportation, Exxon’s Future & Oil News

Bell Helicopter Revolutionizing Mass Transportation


Bell Helicopter is leading the innovation in mass transportation through a partnership with Uber, expecting to create the world’s first air-taxis by 2025, according to Bloomberg.

“Air taxi is the next way for our industry, and it’s very important for us to make sure we are among the disrupters to think about what should be transportation in the next 10-20 years,” said Patrick Moulay, executive vice president for commercial helicopter sales.

oil and gas

A commercial teasing the release of the air taxis shows a familiar Uber-like screen to order the taxi for pickup.

“We’re not going to see a taxi flying tomorrow, but it’s much closer than what people think.”

The initial testing is set to begin in 2020 in Dallas and Dubai, two car-clogged cities with notorious traffic problems.

ExxonMobil to Triple Production by 2025

ExxonMobil, the largest oil company in the U.S., announced plans to triple oil and gas production by 2025 — continuing the positive signs of a boom in national crude production, according to the NY Times.

The company has been investing heavily in the Permian Basin, an area between West Texas and New Mexico leading the way in a national recovery of oil production after a three-year fall in crude prices.

The Permian is roughly the size of South Dakota with multiple layers of thick shale, easing the costs of exploration, drilling and production.

oil and gas

An ExxonMobil drilling site in the Permian Basin.

Exxon said that tripling oil and natural gas production would bring its output in the Permian to 600,000 barrels a day. To support increase production, it will invest more than $2 billion to expand production infrastructure.

Energy companies are racing to build pipelines to move Permian oil and gas to Gulf of Mexico ports for export as well as pipelines to Mexico, where natural gas is replacing oil and coal in an effort to remake the country’s electricity system and clean up urban air.

ExxonMobil said it would spend $50 billion on U.S. operations over the next five years, highlighting the company’s shift to operations in the U.S. and Western Hemisphere.

The Amazing Tech Disrupting Oil & Gas

As each new age group goes “digitally native,” the overall workforce has demanded higher workplace technology standards — even in legacy industries, according to Entrepreneur.

The transition has resulted in massive opportunities for entrepreneurs, creating brand new technologies and updating antiquated processes. The biggest industry opting for digital efficiency and young, entrepreneurial leadership? Oil and gas.

With a booming market and an eagerness for innovation, the industry is ripe for disruption to existing business models and for real growth.

Here’s a snapshot of the top four innovations transforming the oil and gas sector:

Artificial Intelligence

“Artificial intelligence (AI) is set to have the biggest technological impact on the oil and gas industry over the coming years,” according to Omar Saleh, Microsoft’s oil and gas director for the Middle East and Africa.

ExxonMobile, for example, is spearheading AI exploration through a partnership with MIT to explore oceans using AI software.

Cloud Computing

The energy sector’s present adoption of cloud technology is low due to past wariness of security risks, however there’s still a strong future for it.

A forecast by the U.K,-based Oil & Gas Council predicts an increase in adoption due to commercial benefits and possibilities, with some of the most complex organizations embracing the computing power and agility of cloud.

“The oil and gas industry should be afforded exactly the same competitive edge, not confined by their own data centers,” said Shiva Rajagopalan, CEO and founder of Seven Lakes Technologies.

3D-scanning Tech

3D printing is coming in play for oil and gas, creating fast and cost-effective representations of assets for predictive maintenance and execution.

This tech changes the game by:

  • Allowing reverse-engineering to measure oil and gas tools in virtually every shape and size
  • Scanning data to confirm whether replacement parts will fit existing equipment
  • Providing clear documentation of tooling erosion to improve product design
  • Reproducing tooling components

The Internet of Things

We’re well into the fourth industrial revolution, or industry 4.0, at this point in 2018. The industry is aware of the value of IoT, becoming more apparent each day.

Companies are demonstrating new applications for information from these technologies. For oil and gas the value lies in creating a set of standards “to guide how devices are structured, and a common language can be understood,” according to Paul Turner, CMO of Cloudian.

Advanced Robotics

One of the most critical challenges in oil and gas is mitigating risk — which can be managed by deploying human-controlled robotics.

Earlier this year Chevron partnered with OC Robotics to inspect offshore oil and natural gas pressure vessels in the North Sea. The robotic snake arm, built to operate in confined spaces, allows humans to operate critical missions while staying out of harm’s way.

Innovative advances in AI, cloud computing, 3D printing, IoT and robotics are transforming the future of the oil and gas industry.

Trout Fishing and Automation: They Have More in Common Than You Think

The first thing one notices about trout fishing in western Pennsylvania on a clear April morning is the stunning, unnerving calm. The quiet that blankets the shores of the state’s waterways right around 5 a.m. is so still and peaceful it’s nearly sacred.

It’s a serenity that commands respect. It forces grown men to creep along its pathways like children sneaking downstairs on Christmas morning. If they talk, they only do so in a whisper. If they break the silence by snapping a twig, they twist up their faces in embarrassment and apologize profusely but quietly.

There’s a lot of art in fishing—especially fly-fishing—but there’s a fair amount of science involved too.

Knowing the best time of day and what bait to use can mean the difference between winning and losing.

While it might sound simplistic, that’s pretty much the way applying automation and technology to oil and gas operations works. The more data an operator collects on its surroundings and the better it knows the environment, the better chance it has of being successful.

Streaming Data

In the early morning, just after a light rain, as the sky clears and the sun comes out, drops of water collect on leaves and begin to pool. The weight of the water pulls the leaf down and a trickle of water spills out into the river. A small amount of water joins the flow and becomes part of one large stream.

The same goes for the information that unknowingly streams into our networks on a daily basis. Piece by piece, information is collected from offshore platforms and onshore oil wells and transmitted via microprocessor-controlled electronic devices called remote telemetry units. One stream means one thing and came from a specific place, making it usable when operators collect it and learn from it.

HMI/SCADA

Watching a river pass by is not unlike how operators learn about their processes through a SCADA system. Operators interact with the SCADA system by using a human machine interface (HMI), which can be something as simple as a computer screen that displays the SCADA interface.

Automation in Trout fishingThe data coming into the SCADA system can be as simple as a picture of a tank filling with an animation that represents a certain capacity. When the tank in the field is half full, an animation of the tank onscreen rises to 50%.

In addition to visual cues, the SCADA system also provides alarms that indicate if there’s a problem. There also is the “control” aspect, which refers to the operator’s ability to remotely operate the equipment.

Historical Data

What if every piece of information needed to catch every fish on the first cast could be captured?

Today’s powerful historian software does just that. It logs data continuously without fail, collecting thousands of pieces of data and locking them away. For oil and gas companies, this means being able to take years of data from their operations and capturing them into a robust, never-fail locker.

Once those data are captured, they can be analyzed for trends to make better decisions. These practices, while grossly oversimplified, are how companies use Big Data to make things better. Companies analyze years and years of operational data and search for commonalities and trends that will provide insight into how they can improve in some areas or discover deficiencies in others.

A Cybersecurity Strategy

What if fishing wasn’t just a hobby for you? What if your favorite fishing hole was actually the sole source of food for your family, and you needed to protect it at all costs? What if you could segment your part of the river from the rest of the world and cloak it in such a way that no one else could see it?

In the wake of high-profile attacks on big businesses, oil and gas companies across the country are getting serious about implementing a cybersecurity strategy. The Industrial Control System Cyber Emergency Response Team, or ICS-CERT, recommends a defense-in-depth approach involving specific countermeasures to create an aggregated security posture. It can help defend against cybersecurity threats and vulnerabilities that affect an industrial control system.

That technology exists now, and oil and gas companies are using it to hide critical parts of their network. These cybersecurity solutions can sit on a network and cloak high-value assets, servers and endpoints to safeguard against cyber breaches.

Standard Operating Procedures

Standard operating procedures are beginning to change in a very real way. The practice of locking down standard operating procedures makes a lot of sense for a number of reasons.

First, it ensures all operators respond to specific situations in a certain predetermined way. Next, it captures the best practices of the best operators before they are lost to retirement. Finally, it ensures that the critical steps required to complete certain activities, some of which may be regulated by government agencies, are followed strictly and documented diligently.

While the variables involved with fishing are part of the game, for the oil and gas industry, technology has become quite adept at weeding out variability in such a way that it becomes a nonfactor. The technology exists today to predict outcomes with great certainty, forecast asset failure accurately and connect people with real-time data so they make informed decisions.

This post originally appeared online for Hart Energy’s E&P Magazine.

How 3D Printing is Transforming Industry

Remember that scene in “Back to the Future Part II” where the future McFly family prepares dinner by “hydrating” a tiny, dense circle into an entire pizza? In mere minutes, they’re all happily devouring food from the future.

BTTF

The hydrated pizza from “Back to the Future Part II”

This appliance might have seemed impossible back in 1989 when the film premiered, but thanks to today’s 3D printing technology, it’s becoming more of a reality.

In fact, a recent Automation World article detailed the future of 3D printing, or additive manufacturing, in the food industry. And yes, “printing” pizza is a possibility.

Enter Foodini, by Natural Machines— a 3D food printer that makes pizza, pasta, breads, and cookies. Does making ravioli from scratch sound daunting? The creators of Natural Machines suggest to simply load the dough and filling and let Foodini print the pasta for you.

“Foodini is the first 3D printer to print all types of real, fresh, nutritious foods, from savory to sweet,” according to the Natural Machines website. “It uses fresh, real ingredients, making the Foodini the first 3D food printer kitchen appliance to contribute to a healthy eating lifestyle.”

While Foodini isn’t available for purchase quite yet, co-founder Lynette Kucsma, envisions a time where every household will own their own 3D food printer, according to Automation World.

Industry experts even say that 3D printing will help food manufacturers, not harm. Laurence Gibbons of Food Manufacture said it will be a huge part of the food and beverage industry — reducing costs and production time. In fact, Gibbons suggests it could even be as valuable to food manufacturers as the Internet.

But 3D printing isn’t limited to the food industry– it’s anything but.

New Balance, the athletic wear brand, announced yesterday their newest running shoe model– one that incorporates a 3D-printed midsole.

Instead of the traditional foam at the bottom of a sneaker, this model will have a lighter, 3D-printed midsole. According to Fast Company, brands like Nike, Adidas, and New Balance have experimented with 3D printing for a few years now. Apparently, shoe companies are now competing to make a lighter shoe, one that can be produced quickly and they’re doing so with the help of 3D printing.

Photo courtesy Creative Tools

Photo courtesy Creative Tools

So if food, running sneakers, and even automobile parts are impacted, where else is 3D printing applicable?

According to Jesse Snyder of Alberta Oil Magazine, the oil and gas industry may be next. Snyder said Apollo-Clad’s laser cladding is a lot like 3D printing oilfield pipes and tools.

“Suspended in the air over the tube is the spray nozzle of a laser-cladding machine, which has been placing successive layers of tungsten carbide to build up three “stabilizer blades” in the center portion of the tool,” said Snyder.

Doug Hamre, the head of research and development at Apollo-Clad, a company that manufactures and repairs downhole tools and mining equipment, said it’s “exactly like 3D printing, but on a larger, industrial scale.”

David Greenfield of Automation World even said back in 2014 that “the ability to print using many different types of materials, and decreasing costs” could make 3D printing a game changer for the global automation market.

At the 2014 IHS Industrial Automation conference, senior principal analyst Alex Chausovksy said that industrial machinery production is an area to be most dramatically impacted by 3D printing technology.

“The increased ability for innovation in design means that companies armed with 3D printing technology can ‘work from function rather than fit,’ allowing changes to be made far more quickly than ever before,” said Greenfield.

According to Chausovksy, we are on the cusp of a new way to produce. However, he warns that another change it could bring to the manufacturing industry is “a restructuring of intellectual property rights.”

“Manufacturers will have to think about IP (intellectual property) in a different way. They may need to move from selling physical parts to selling CAD files for customers to print,” said Chausovksy in the Automation World article.

If this explosion of additive manufacturing or 3D printing can teach us anything, it’s that technology continues to transform industries of all sizes and compositions.

ICYMI: The Digital Oilfield, Reported Growth for the Industrial Internet and More

Growth for the Industrial Internet

personphonelaptop

According to a recent report by the global market and business intelligence firm Infiniti Research, we should expect some major growth for the Industrial Internet in the next few years.

In fact, researchers expect the Industrial Internet of Things (IIoT) to grow at a compound annual growth rate (CAGR) of 26.56% over the next four years– taking us into the year 2019.

The report separates the IIoT industry into four end-user segments including manufacturing, energy and utilities, automotive and transportation, and healthcare.

As the report confirms, the growing demand of big data analytics emerges from “interoperability issues among existing systems” while the market driver is the “realization of industrial IoT benefits by businesses and governments.”

Drones and Data in the Digital Oilfield

oil-refinery-and-field-1509495Rhiannon Meyers of FuelFix, a blog from the Houston Chronicle, paints a picture of what the future oilfield could look like in a recent post.

“A pump collects data about the oil it is hauling to the surface and re-configures its operations to handle the crude more efficiently. A roughneck tripped up by a repair job logs into a mobile device from the rig and downloads a training video. Drones fly out to remote locations to inspect oil field equipment and scour the best places for new well pads,” Meyers wrote.

These days, oil and gas companies are hunting for new, innovative ideas to increase operational efficiency and ultimately, save money. Meyers suggests that despite falling oil prices that may be “battering exploration and production companies, forcing industry-wide cutbacks,” oil and gas professionals are beginning to turn to the tech industry.

Could drones be sent to do the risky parts of the job, such as exploring remote areas for the best drilling spots? That may be unclear, but the need for technology and innovation in the oil and gas industry is evident.

In fact, on Friday, September 18, Gray Matter Systems is hosting an oil and gas executive breakfast discussing how to achieve operational efficiency in the digital oilfield.

Interested in attending the event? Click here to learn more.

WiFi, Hot Tubs & Big Data

Have you noticed how popular the peer-to-peer economy is becoming? The car service, Uber, for example, is a hot topic. Airbnb is another one– the “community marketplace for people to list, discover, and book unique accommodations around the world, online or from a mobile phone or tablet.”

But how do users of the website charge for one? Emily Badger of The Washington Post  asked the same question yesterday.

” Is it a townhome, a penthouse, a cabin, a castle, a teepee, a yurt? A single room or a whole home? The bed: double or queen? The view: riverfront or city skyline? The Left Bank or right one? How gourmet is the kitchen? Is there a subway stop nearby or off-street parking? Are the Grateful Dead in town? Or the cherry blossoms blooming?” asked Badger. 

Airbnb, however, an apparent “lover of big data,” wants to offer a more precise guidance to hosts trying to establish a price– which means adding all these questions into an algorithm.

To read more about Airbnb and their plan to incorporate big data into the peer-to-peer community, click here.

This app knows how you feel — from the look on your face

“Our emotions influence every aspect of our lives — how we learn, how we communicate, how we make decisions. Yet they’re absent from our digital lives; the devices and apps we interact with have no way of knowing how we feel. ”

Scientist Rana el Kaliouby aims to change that. She demos a powerful new technology that reads your facial expressions and matches them to corresponding emotions. This “emotion engine” has big implications, she says, and could “change not just how we interact with machines — but with each other.”

Media We Link to:

“Industrial Internet of Things to Grow by 26.56% annually up to 2019” – Metering and Smart Energy International 

“Drones and data could dominate future oil fields” – FuelFix Blog

“WiFi, hot tubs and big data: How Airbnb determines the price of a home” — The Washington Post 

Contact GrayMatter

Get in touch with us!

Translate »